Resty Daylight Lamp 10,000 Lux
Bright daylight white for your desk and dark mornings.
Daylight for your day
Bright daylight, plus an R/IR mode for near-infrared.
The Resty Daylight Lamp is made for mornings, desks and darker rooms. Unlike a MARS body panel, it focuses on bright daytime light in a compact, simple setup.
Daylight for the hours that need it
Two modes, right on your desk
Visible enough to use daily
Trial, warranty and support
The Resty Daylight Lamp brings bright light to dark mornings and your desk. In FS mode at full brightness, the calculated value is about 10,000 lux at 80 cm. Five brightness levels and a timer let you adjust the light to your setup. The lamp has two modes: FS gives white, red and near-infrared light; R/IR gives near-infrared.
Brightening up a workplace? Resty supplies daylight lamps for the office in larger numbers.
Buying a daylight lamp: compare light at your sitting distance
A 10,000-lux label is only useful with a distance. Check how far you sit from the lamp, which way it points and which brightness level is set. Resty lists about 80 cm as its reference distance. Moving farther away, sitting outside the beam or dimming the lamp reduces the light reaching you.
Daylight lamp features
- Two modes: FS (white, red and near-infrared) and R/IR (near-infrared)
- Five brightness levels and a built-in timer
- Compact format with stand, power adapter and manual
- 60-day home trial and 3-year warranty; the return and warranty terms apply
How to use the daylight lamp at your desk
Place the lamp directly in front of you on your desk, so that you sit within the beam. Choose FS mode when you want bright light; set the brightness level and timer as needed.
Guide: what 10,000 lux and distance mean
Measured light data and calculated lux
In the supplier's test report, the lamp was measured on an EVERFINE HAAS-1200: 1,428 lm, 5,430 K and CRI Ra 89.4. The approximate 10,000 lux at 80 cm is calculated at full brightness from the light output and the 30° lens geometry; it is not a direct lux measurement at that distance in the report. Actual illuminance depends on your position and settings.
View the light measurement report (PDF)
Daylight lamp or red light panel?
Choose this lamp when bright visible light at your desk or on dark mornings matters most to you. For larger areas of the body, compare the dedicated MARS panels. The R/IR mode of this compact lamp does not cover the same area as a larger panel.
Compare the MARS 400 red light panel
Before use
If you have an eye condition, are sensitive to light or take medication that increases light sensitivity, ask a qualified professional before use. Follow the manual and eye-protection instructions for each mode. Choose a comfortable brightness and stop if the light causes discomfort.
✓ About 10,000 lux at 80 cm at full brightness (calculated)
✓ Two modes: FS (white, red and near-infrared) and R/IR (near-infrared)
✓ Desk friendly panel with simple controls
✓ Morning light routine, without rebuilding your room
Choose options

Measured light and calculated lux
How we calculate about 10,000 lux at 80 cm
The supplier's report measured the lamp on an EVERFINE HAAS-1200 spectroradiometer. The chart shows the FS-mode spectrum next to the CIE daylight reference at 5,430 K, both scaled to the same brightness. FS mode gives visible light with a red peak at 664 nm, plus near-infrared.
- Resty Daylight Lamp, FS mode (measured)
- CIE daylight reference (5,430 K)
Wavelength (nm)
Spectral range
CIE daylight reference (5,430 K) Calculated reference curve; continues beyond this chart
Resty Daylight Lamp, FS mode (measured) About 410–880 nm: visible light and near-infrared
Measured and calculated values
- Illuminance
- Approx. 10,000 lux at 80 cm (calculated, full brightness)
- Lens angle
- 30°
- Beam width at 80 cm
- Approx. 43 cm (calculated)
- Colour temperature
- 5,430 K (measured)
- Colour rendering
- CRI Ra 89.4
- TM-30 fidelity / gamut
- Rf 93 / Rg 107
- Luminous flux
- 1,428 lm (measured)
Calculated lux by distance (full brightness)
- 80 cm: reference
- ≈ 10,000 lux
- 100 cm
- ≈ 6,500 lux
- 120 cm
- ≈ 4,500 lux
Source: supplier's report, measured in March 2026 on an EVERFINE HAAS-1200 spectroradiometer. Lux-by-distance values are calculated at full brightness from the measured luminous flux (1,428 lm) and the 30° lens geometry. View the full test report (PDF)
Bright daylight and near-infrared in one panel
About 10,000 lux at 80 cm
Calculated at full brightness from the measured light output and the 30° lenses. Not directly measured at this distance.
Two light modes
FS: white, red and near-infrared. R/IR: near-infrared, with only a faint red glow.
Measured spectrum
Supplier's report (EVERFINE HAAS-1200): 1,428 lm and 5,430 K, with a red peak at 664 nm.
Compact desk lamp
Includes lamp, stand, power adapter and manual. Simple setup for daily use.
About 10,000 lux at 80 cm
Calculated at full brightness from the measured light output and the 30° lenses. Not directly measured at this distance.
Two light modes
FS: white, red and near-infrared. R/IR: near-infrared, with only a faint red glow.
Measured spectrum
Supplier's report (EVERFINE HAAS-1200): 1,428 lm and 5,430 K, with a red peak at 664 nm.
Compact desk lamp
Includes lamp, stand, power adapter and manual. Simple setup for daily use.
What other people say
Resty Daylight Lamp 10,000 Lux
Questions before you choose?
What makes the Resty Daylight Lamp different?
When should I use daylight mode?
What does R/IR mode do?
Is the Resty Daylight Lamp a MARS panel replacement?
How do I switch between FS and R/IR?
How do I set up the lamp?
What distance does the lux value apply to?
How is it different from a normal lamp?
What is included?
What trial and warranty are included?
Question not answered here? Send a message We typically respond within 24 hours.
Returns and support
-
60 days to try it
Try it at home and request a return within 60 days of delivery. For trial returns, you pay return shipping.
Read return conditions -
3-year device warranty
Covers manufacturing and material defects during normal home use. See the terms for coverage and exclusions.
Read warranty terms -
Arrived damaged?
Contact us as soon as possible with your order number and, if helpful, photos. We'll assess the issue and arrange a suitable solution.
Get help with your order











































