Resty MARS 200 PRO LED Face Mask
Three light programs, remote control and a simple at-home routine.
Choose your mask
Resty MARS 200 PRO LED Face Mask
MARS 200 PRO288 light chips · More control
MARS10068 LEDs · Simple start
What each mode is for
Exact specifications
Use, charge and clean
288 light chips. Three wavelengths. One repeatable routine.
The Resty MARS 200 PRO brings blue, red and near-infrared light together in a lightweight, wireless face mask. Its 288 light chips distribute 460 nm, 630 nm and 850 nm light across the face, while the included remote lets you choose the program, brightness and session time without interrupting your routine.
Resty also supplies LED masks for salons and skin clinics.
Choose the routine that fits your moment
- M1 Glow - 630 + 850 nm: a red and near-infrared program for a fresh, radiant-looking complexion.
- M2 Clear - 460 + 850 nm: a blue and near-infrared program for a clear, calm-looking complexion.
- M3 Complete - 460 + 630 + 850 nm: all three wavelengths in one complete light routine.
No complicated controls on the mask: select M1, M2 or M3 with the remote, choose low, medium or high brightness, and set the timer to 5, 10 or 15 minutes.
Made for a routine you can actually keep
At approximately 280 g, the flexible mask is comfortable to wear and the adjustable head strap helps keep it in place. The 1440 mAh controller battery makes the mask wireless during use, so you can sit back, read or continue a quiet part of your evening routine.
A full charge takes around 3 hours via USB-C. According to the supplied manual, one charge provides up to approximately 40 minutes at low brightness or three 10-minute sessions at high brightness. The mask cannot be used while charging.
How to use
- Place the clean mask over a clean, dry face and adjust the head strap.
- Switch on the controller and select M1, M2 or M3.
- Choose the brightness and set a 5, 10 or 15-minute timer.
- After use, switch off the controller and wipe the mask with a soft, slightly damp cloth.
Follow the session schedule in the supplied manual and do not exceed 20 minutes of use per day.
Exact specifications
- 288 light chips
- Wavelengths: 460 nm blue, 630 nm red and 850 nm near-infrared (each ±3 nm)
- Programs: M1 red + near-infrared, M2 blue + near-infrared, M3 blue + red + near-infrared
- Brightness: low, medium and high
- Timer: 5, 10 or 15 minutes
- Rated power: 4 W
- Battery: 1440 mAh
- Charging: USB-C, approximately 3 hours
- Dimensions: approximately 640 × 220 × 5.8 mm
- Weight: approximately 280 g
What is included
- Resty MARS 200 PRO LED face mask with adjustable head strap
- Remote controller
- USB-C charging cable
- English user manual
Important safety information
Keep the mask and controller away from water, high heat and direct sunlight. Do not use damaged equipment. Consult a qualified healthcare professional before use if you have a pacemaker, an implanted electronic device, a light-sensitive condition, use photosensitising medication or are unsure whether light exposure is suitable for you. Keep out of reach of children.
CE marking and documentation
A visible CE marking is present on the supplied packaging and in the user manual. View the CE marking photo evidence (PDF). This PDF documents the visible marking; it is not the manufacturer’s Declaration of Conformity.
Choose options
MARS 200 PRO at a glance
- 288 light chips
- 460, 630 and 850 nm
- M1, M2 and M3
- Low, medium and high brightness
- 5, 10 or 15-minute timer
- Wireless, about 280 g
- USB-C charging
- Included remote
Up to 54 mW/cm² at the highest setting (manufacturer specification).
Follow the instructions, including eye protection and session settings.
288-chip light coverage
Blue 460 nm, red 630 nm and near-infrared 850 nm across the face in three selectable programs.
Control the full routine
Remote control, three brightness levels, 5/10/15-minute timer and wireless use.
288-chip light coverage
Blue 460 nm, red 630 nm and near-infrared 850 nm across the face in three selectable programs.
Control the full routine
Remote control, three brightness levels, 5/10/15-minute timer and wireless use.
Also available at
Resty MARS 200 PRO LED Face Mask
Questions before you try it
Which wavelengths and modes does the mask have?
How is the mask controlled?
Can I adjust brightness and session time?
How long should one session last?
How long does the battery last?
How do I charge it?
How do I clean the mask?
What is included?
Question not answered here? Send a message We typically respond within 24 hours.
Returns and support
-
60 days to try it
Try it at home and request a return within 60 days of delivery. For trial returns, you pay return shipping.
Read return conditions -
Arrived damaged?
Contact us as soon as possible with your order number and, if helpful, photos. We'll assess the issue and arrange a suitable solution.
Get help with your order
